| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Vehicle Exterior | Section: Lighting (ext) | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM0000033GO002X |
| Title: LIGHTING (EXT): HEADLIGHT ASSEMBLY: REMOVAL (2008 Sequoia) | ||
REMOVAL
HINT:
- Use the same procedure for both the RH and LH sides.
- The procedure described below is for the LH side.
1. REMOVE FRONT END PANEL (w/o Headlight Cleaner System)
|
(a) Remove the 2 clips. |
|
(b) Disengage the 2 clips and remove the front end panel. |
2. REMOVE FRONT END PANEL (w/ Headlight Cleaner System)
|
|
(a) Remove the 2 clips. |
|
(b) Disengage the 2 claws and 2 clips and remove the front end panel. |
3. REMOVE HEADLIGHT ASSEMBLY
|
(a) Remove the 2 screws. |
(b) Remove the bolt.
(c) Disconnect the connectors, and then remove the headlight.
|
|